Under Bonnet: |
- Carry Out Engine Compression Test
- Check Tappets Or Lifters For Noise & Report
- Inspect Emission Control System
- Inspect Operation of E.G.R
- Inspect P.C.V Valve Operation
- Inspect Timing Belt or Enquire With Client When it Was Last Replaced
|
Electrical And Starting System: |
- Check Condition Of Battery
- Load Test Battery
- Inspect/Top Up Electrolyte Level
- Inspect Battery Terminals
- Test Starter Motor Current Draw
- Test Alternator Voltage Output Under Load
- Test Park Neutral Switch Operation
- Check Power Supply Cables Securely Mounted
|
Ignition System: |
- Check Colour and Wear Characteristics of Old Plugs and Points (If Applicable)
- Inspect Ignition Leads for Wear or Burn Marks
- Inspect Ignition Leads for Security and Mounting Replace Spark Plugs
- Inspect and Adjust Spark Plug Gaps
- Check Ignition Coil Voltage Output
- Check Ignition Coil for Cracks or Leaks
- Inspect Main Engine Earth
- Check And Adjust Ignition Timing To Manufactures Specifications
|
Carburettor And Fuel System: |
- Replace Air Filter
- Replace Fuel Filter
- Check Fuel Lines, Hoses And Pipes
- Inspect And Check Carburettor Condition And Security
- Inspect And Adjust Carburettor Idle & Mixture Air Speed Screws
- Inspect Vacuum Lines & Hoses
- Inspect Idle Stop Solenoid Operation
|
|
Electronic Fuel Injection System: |
- Inspect Throttle Body For Security
- Check Operation Of Injectors
- Inspect Fuel Rail Condition & Security
- Adjust Idle Air Speed
- Check And Inspect E.F.I Components For Security And Operation
|
Road Test: |
| Check & Report On Vehicle For Engine Performance, Braking, Steering, Suspension And Operation Of All Accessories & Lights |
|
| Back to Previous Page |